## 5.2.1 Windows Download KidsBlock IDE on [Windows](https://xiazai.keyesrobot.cn/KidsBlock.exe). **Install the KidsBlock IDE:** 1\. Click “**KidsBlock.exe**”: ![Img](./media/kidsblock-1.png) 2\. Tick “**Anyone who uses this computer(all users)**” and click “**Next**”. ![Img](./media/kidsblock-2.png) 3\. Click “**Browse...**” to choose a path for the software (here we choose Disk C) and then “**Install**”. ![Img](./media/kidsblock-3.png) ![Img](./media/kidsblock-4.png) 4\. Click “Finish” and open Kidsblock. ![Img](./media/kidsblock-5.png) 5\. If a warning interface pops up, just “**Allow access**”. 6\. Main interface of Kidsblock: ![Img](./media/kidsblock-6.png) 7\. Check update: ![Img](./media/kidsblock-9.png) ![Img](./media/kidsblock-10.png) ⚠️ **In addition to following the above steps, you can also refer to the animated demonstration in the link below.** [https://docs.keyestudio.com/projects/KidsBlock/en/latest/docs/Kidsblock.html](https://docs.keyestudio.com/projects/KidsBlock/en/latest/docs/Kidsblock.html) ## 5.2.2 MacOS Download KidsBlock IDE on [MacOS](https://xiazai.keyesrobot.cn/KidsBlock.dmg). ⚠️ **The installation steps of Kidsblock IDE are as follows. Please refer to the animated demonstration in the link below.** [https://docs.keyestudio.com/projects/KidsBlock/en/latest/docs/Kidsblock.html](https://docs.keyestudio.com/projects/KidsBlock/en/latest/docs/Kidsblock.html) ## 5.2.3 Getting started with Kidsblock ⚠️ Here we demonstrate on Windows, and it can be a reference for MacOS. ### 5.2.3.1 Select a Device 1\. Connect the board to your computer via the USB cable. Click “**KidsBlock**” ![Img](./media/KidsBlock.png) to open it. ![Img](./media/a36.jpg) 2\. Click ![Img](./media/Equip.png). ![Img](./media/Equip-1.png) 3\. Select “**Turtle Robot**”. ![Img](./media/Equip-3.png) 4\. Choose the USB serial port (COM25) to Connect. ![Img](./media/Equip-4.png) 5\. Click **Go to Editor**, Back to the editor. ![Img](./media/Equip-5.png) ### 5.2.3.2 Main Interface Functions ![Img](./media/Equip-7.png)